|E-posta adresi *|
|Sirket adı *|
|tip:||Kurutma makineleri||kapasitesi (kg):||120|
|yükseklik feet:||1025||makine numarasını:||3513|
Kurutma makineleri, texfinity tarafından imal edilmiş ikinci el bir makinedir. Tam olarak kontrol edilmiş ve tamir edilmiş halde ya da mevcut haliyle sunmaktayız. Her Kurutma makineleri ait bilgiler aşağıdadır:
Texfinity Presents: Second hand:
SENKING Transfer drying tumbler DT 120 - Gas
Positioning of the fan and of the lint filter in loading direction 1x to the right and 2x to the left.
- Heating: gas-heated modulating gas burner min. flow pressure in front of the dryer: min. 30bar
- with heat recovery via air recirculation
- with sprinkler
To carry over:
Tilting version with exhaust duct separator.
- Nominal load, batch size: 116kg
- Depending on the type of linen
- At a filling ratio of: 1:25
- Peak - water evaporation: 5,2l/min.
- Average water evaporation: 4,3l/min.
- pedestal height, standard: 1025mm
- Empty weight: approx. 2150kg
- Nominal voltage: 415V
- Nominal frequency: 50Hz
- Control voltage: 230/24V
Robust steel plate housing, coated and heat-insulated with maintenance doors which are opening widely.
Feeding by means of a big sliding door which opens up to the bottom. Entire loading wall is swivelling for maintenance purposes.
Unloading via a big flap door which releases the entire drum width.
--> big drum for high evaporation performance
--> with long-life, easily accessible axial seal
--> all parts with linen contact: stainless steel
--> with 4 beaters
--> due to high temperature-resistant, big drum running wheels with a very long life and a high carrying power for small path rings there is more perforated drum surface.
--> steel rings with turned running surfaces
--> encased slip-on-gear mechanism-drum drive requires only little maintenance (no regreasing or tightening of chains or belts!)
--> Speed adjustment by means of frequency converter, for the individual adjustment for drying and unloading
--> all drive elements are fixed by maintenance-friendly cone tensioning elements (no feather key connection!)
--> radial fan with bent scoops
--> low noise level due to efficiency-optimized fan (0,82) and good insulation
--> lint filter : stainless steel
To carry over:
Control: PLC control INLINE which can be programmed via a programming unit.The programming unit of the PLC is installed in the compound control of the dryer system.
With 100 freely programmable programs.
If the dryer is used in a business area/in a residential district, measures regarding sound dissipation have to be taken locally for the exhaust airline.
Maintenance doors/Lint filter side and input - RAL 5015 - sky blue
Housing, underframe, switch panel, output covering - RAL 7035 - light grey
Upper works: RAL 9005 - black/satin finish
3 Cool-down, via fresh air flap
3 Flexible gas connection, for tilting version
3 Flexible water connection for sprinkler, for tilting version gas drying tumbler
3 Extended legs, pedestal height = 2030 mm
3 Rubber apron, around the unloading chute
3 Overdrying protection, in case of increase of exhaust air temperature.
3 Control with photocell, for unloading into linen trolleys
To carry over:
3 Heat recovery, air re-circulation via heating coil
1 Central lint removal for 3 dryers
25 Central lint removal tube line per m
|Senking Flyer DT36 50 75 100 Trockner.DE...|
|Senking DT Trockner technical Specs.DE.p...|
|Tip:||Su sıkma presi|