High Speed High Quality Ironing Line in excellent condition from 2009 & 2007

Immediately available, 3500mm working width, 1600mm diameter ironer, ready to run

This ironing line is in exceptional condition, immediately available and very flexible. It can handle sheets and table linen on 1 and 2 lanes with 3 long folds and 2 or 3 cross folds, and stacked on one stacker on the left side of the line. The feeder has all options to give the highest possble feeding on high speed, but can also handle small piece feeding and folding on 3 lanes.

Ideal for handling your sheets and duverts with excellent feeding and folding. The 2 roll 1600mm diameter steam heated ironer will assure you reach a high efficiency.

See more details below, or by clicking the links to the individual machines to see more pictures. Contact us on info@texfinity.com or visit www.texfinity.com for more information.

Kannegiesser EMT-S

Universal feeding machine with 3 feeding stations for optimum ironer application with a high performance per operator.

The Combifeed can process a wide range of articles – from 1 lane processing of bed linen to automatic 1 and 2 lane feeding of table linen where high quality standards are required to 2 lane high performance feeding.

The item is fed into the machine and transferred to the spreading clamps. After measuring the width, it is spread with optimum speed and force, depending on type and width of the item. The vacuum transfer bar accepts

the straight leading edge, briefly stores the item with relation to ironer speed, and then places it with its stored transfer profile onto the Duo vacuum belts. The automatic spreading system combined with the proportional control of the spreading force ensures a perfectly square and straight leading edge and lane centre feeding. Despite its extremely dynamic drives, the machine is notable for its smooth operation. The use of high performance timing belts and a lint resistant rail profile make the drive of the clamp carriages almost maintenance-free.

Articles that can be processed in 2 lane operation ensure optimum ironer utilisation and very high throughput capacity – providing that a powerful feeding technology is available. The Combifeed Trio with HighSpeed Package can process, depending on the article, up to 1600 items/h. This way, high absolute capacity is achieved as well as a high per capita capacity – another step towards increased productivity.

Apart from the excellent leading edge quality, the use of the vacuum transfer bar for intermediate storage results in increased throughput capacity. The spreading clamps can transfer the item immediately after spreading and pick up the next one from one of the three stations. This way, availability of the clamps for the operators is increased. After sensitive spreading, the item is transferred to the vacuum transfer bar. This ensures excellent quality of the leading edge and safe transfer to the transporting belts with Duo vacuum. The high position of the vacuum chute enables good shake-out and long process time.

The package for small pieces enables manual feeding directly onto the perforated feeding belts with vacuum holding function. In this operating mode, due to the automatically lowering of the vacuum chute the pieces also undergo a good shake-out in the vacuum chute.

Lapauw 2C1635

This HIGH CAPACITY ironer is in excellent condition and has following features:

2 roll 1600mm diameter, 3500mm wide
Year 2009!!!
Chest Lapauw of high quality
Hydraulic lifting system for the chests.
Feeding belts
Completely covered (isolation!)
Heated bridge
Total ironing length : 5,3meter!
18kw motor, frequency controlled
Axe-connected gearboxes
Temperature, speed, pressure indication
Steam valves included

Kannegiesser CFM

The FoldMaster Compact is a high performance folder for both large and small piece production. High output ironing lines are the typical application for this machine.

The strength of the FoldMaster Compact is its reliable high quality folding at speeds up to 50 m/min (165 fpm). Up to 1,400 items per hour in 1 lane and more than 2000 items per hour in 2 lane operation can be processed and smaller items in multiple lanes can be folded with length folds and discharged to the take off table.

Antistatic coating is applied to all rollers and support plates to assist in eliminating the static charge associated with many textiles.

For individual programming and operation, the FoldMaster Compact is equipped with Kannegiesser’s standard, user-friendly Control Panel, IBT-Basic. This system automatically diagnoses any operational fault and can give the message in clear text format on the display.

Principle: Folding by means of an air blast for length folds, by means of a blade for the cross folds.

Cross fold section KR3: Large articles cross folded in 1 or 2 lane operation. Small articles in multi-lane operation without cross fold, discharged onto the take off table.

You are receiving this mailing because you subscribed to the Texfinity maillist.
To unsubscribe please click here.
You cannot reply to this e-mail. For more information send an e-mail to: info@texfinity.com